The EU Tyre Label provides fleet operators and tyre retailers with objective, reliable and comparable information on three important tyre performance characteristics.
Click here to find the EU Tyre Label values for your tyre or any other current Uniroyal Truck or Bus Tyres.
The European Parliament has passed a regulation to introduce a standardised labeling for tyres across Europe. Since 1 November 2012, the EU tyre label will be compulsory for all tyres that are produced after 1 July 2012. The aim is to increase the safety and the environmental and economic efficiency of road transport and to reduce total energy consumption by 20 % by 2020.
The three aspects of efficiency, safety and the environment are shown on the label in the following categories: fuel efficiency, wet grip and external rolling noise. The principle is thus similar to the energy efficiency label that appears on washing machines, fridges and other electrical appliances.
The consumer is therefore able to objectively compare tyres and to incorporate this knowledge, along with other criteria, into his purchasing decision. As well as the three label values there are other criteria that are relevant for safety and efficiency. These include, for example, mileage, braking performance on dry surfaces, driving stability and retreadability.
Wet grip / braking performance
Braking distance in wet weather conditions from A (short) to G* (longer).
Wet grip is one of the most important safety properties of a tyre. A good value means a short braking distance on a wet road. Improvement by one class means a reduction of the braking distance by 5 to 10 meters in the event of full braking from 80 km/h. In an emergency, every meter counts and could be the crucial factor in avoiding an accident.
Fuel efficiency / rolling resistance
Fuel consumption from A (low) to G* (higher).
The rolling resistance significantly influences a truck’s fuel consumption and thus plays an important role from an economic and ecological point of view. This is because low fuel consumption has a positive effect on the carbon footprint of the vehicle.
Savings up to 3.5 l/100 km can can be made between two classes (e.g. B and C).
External rolling noise / noise emission
Sound level from 1 (quiet) to 3 (louder) sound waves.
The rolling noise of a truck tyre contributes to traffic noise and thus environmental noise pollution. As well as the measured value in decibels, the label will show the noise level in classes of between one and three sound waves. Three sound waves indicate tires that exceed the limit which will be in force from 2016. Tyres with two sound waves are below this future limit, with one sound wave they are below it by more than 3 dB. A change to the sound level by 10 dB equates to the volume being halved or doubled.
* G is not used